Tube Based Gas Suppression System

Tube Based Gas Suppression System Specification

Product Type
clean agent based fire suppression system

Color
RED

Material
UL APPROVED

Temperature Range
100 Celsius (oC)

Weight
20 Kilograms (kg)

Frequency
50 Hertz (HZ)

Warranty
12 MONTHS

Usage
fire suppression system

Alarm
YES

Input Power
230 Volt (V)

Dimension (L*W*H)
0.3x0.3x0.7 Meter (m)

Application
Electrical Panels fire suppression system

Tube Based Gas Suppression System Trade Information

Minimum Order Quantity
1 Set

Payment Terms
Others

Supply Ability
500 Sets Per Month

Delivery Time
4 Week

Sample Available
Yes

Sample Policy
Within a certain price range free samples are available

Packaging Details
Fire suppression system kit

Main Export Market(s)
Asia

Main Domestic Market
All India

Certifications
CE, LPCB, FM & UL Approved

About Tube Based Gas Suppression System

Direct Low Pressure Clean agent fire suppression system: AR SUPPRESSION DLP- Direct Low-Pressure Clean Agent Systems are primarily a Pre-Engineered Automatic Fire detection and suppression System utilizing various Low-pressure Clean agents i.e. HFC227ea, Novec1230/FK-5-1-12.

The AR SUPPRESSION Linear Pneumatic Fire Detection Tubing (LP-FDT) is installed and connected to DLP Valve and routed throughout the protected hazard area/enclosure. The primary function of Pneumatic Fire Detection Tube (under pressure) is to detect heat/fire and activate the valve for discharge of the agent by rupturing at the hottest point along its installed length on flame impingement. On rupture a nozzle is formed at the burst point.

The clean agent under pressure, in the cylinder then flows out through the burst point, distributing the clean
Direct Low Pressure DLP Clean Agent System Unit.

Indirect Low Pressure Fire Suppression system : AR SUPPRESSIONILP- Indirect Release Low-Pressure Clean Agent Systems are primarily a Pre-Engineered Automatic Fire detection and suppression System utilising various Low-pressure Clean agents i.e. H FC227ea, Novec1230/FK-5-1-12, FE36 etc.

The AR SUPPRESSION Linear Pneumatic Fire Detection Tubing (LP-FDT) is installed and connected to ILP Valve and routed throughout the protected hazard area/enclosure. The primary function of Linear Pneumatic Fire Detection Tube (under pressure) is to detect heat/fire and activate the valve for discharge of the agent by rupturing at the hottest point along its installed length on flame impingement.

On rupture due to loss of pressure in the tube connected to the valve, the pressure from the top assembly of the ILP valve is released (can be done by both automatic or manual activation) thereby the internal piston slides to its fully open position, allowing the pressurised Clean agent to travel through any or combination of three outlet ports via delivery hose/pipes and discharge out from the fixed nozzles, within the protected area, flooding the entire area with the agent and suppressing the fire instantly.