|Home||» Products||» Fire Hydrant System||» Inlet Breeching|
With an aim to be a leader in our domain, we are emerging as the trusted manufacturer and supplier of Inlet Breeching. It is installed very close to the rising main so that the pressure loss is minimized particularly when operating in high rise buildings. It is often contained in a red protective box which is kept locked shut. The Inlet Breeching is used to feed water into the rising main through 2 1/2” fire hoses and can be mounted either horizontally or vertically.
Inlet Breeching, C.I. Body having Two Gunmetal 63mm male instantaneous inlets conf. to IS:904, fitted with non-return valves, flanged outlet 220mm OD, 180mm PCD, eight holes of 19mm dia., complete with gunmetal 25mm size drain-valve, two rubber blank caps and chains.
Inlet Breeching, C.I. Body, having Three Gunmetal 63mm male instantaneous inlets conf. to IS:903, fitted with non-return valves, flange outlet 220mm OD, 180mm PCD, eight holes of 19mm dia., complete with gunmetal 25mm size drain valve, three rubber blank caps and chains.
INLET BREECHING, C.I body, having Four Gunmetal 63mm male inst. Inlets con. To IS.:903, fitted with non-return valves having flanged outlets of 280 mm OD , 240 mm PCD eight 22 mm dia. Bolt holes.